Upgrade to Synnefo v0.15

Prerequisites

Before upgrading to v0.15 there are three steps that must be performed, relative to the Cyclades networking service.

Add unique names to all NICs of all Ganeti instances

Since Ganeti 2.8, it is supported to give a name to a NIC of a Ganeti instance and then refer to the NIC by that name (and not only by its index). Synnefo v0.15 assigns a unique name to each NIC and refers to it by that unique name. Before upgrading to v0.15, Synnefo must assign names to all existing NICs. This can be easily performed with a helper script that is already shipped with Synnefo v0.14.10:

cyclades.host$ /usr/lib/synnefo/tools/add_unique_name_to_nics

Note

If you are not upgrading from v0.14.10, you can find the migration script here.

Extend public networks to all Ganeti backends

Before v0.15, each public network of Cyclades existed in one of the Ganeti backends. In order to support dynamic addition and removal of public IPv4 addresses across VMs, each public network must exist in all Ganeti backends.

If you are using more than one Ganeti backends, before upgrading to v0.15 you must ensure that the network configuration of all Ganeti backends is identical and appropriate to support all public networks of Cyclades.

Update Ganeti allocation policy

Minimum number of NICs

Before v0.15, all Cyclades VMs were forced to be connected to the public network. Synnefo v0.15 supports more flexible configurations and dynamic addition/removal of public IPv4 addresses, which can result in a VMs with no NICs at all. However, Ganeti’s default allocation policy will not allow instances without NICs. You will have to override Ganeti’s default allocation policy to set the minimum number of NICs to zero. To do this, first get the current allocation policy:

$ gnt-cluster show-ispecs-cmd
gnt-cluster init --ipolicy-std-specs cpu-count=1,disk-count=1,disk-size=1024,memory-size=128,nic-count=1,spindle-use=1
  --ipolicy-bounds-specs min:cpu-count=1,disk-count=1,disk-size=1024,memory-size=128,nic-count=1,spindle-use=1/max:cpu-count=8,disk-count=16,disk-size=1048576,memory-size=32768,nic-count=8,spindle-use=12
  ganeti1.example.synnefo.org

And replace min:nic-count=1 with min:nic-count=0. Also, set max:nic-count=32 to avoid reaching the default limit of 8.

gnt-cluster modify --ipolicy-bounds-specs min:cpu-count=1,disk-count=1,disk-size=1024,memory-size=128,nic-count=0,spindle-use=1/max:cpu-count=8,disk-count=16,disk-size=1048576,memory-size=32768,nic-count=32,spindle-use=12

Enabled and allowed disk templates

In v0.15, the ARCHIPELAGO_BACKENDS setting, that was used to separate backends that were using Archipelago from the ones that were using all other disk templates, has been removed. Instead, allocation of instances to Ganeti backends is based on which disk templates are enabled and allowed in each Ganeti backend (see section in admin guide). You can see the enabled/allowed disk templates by inspecting the corresponding fields in the gnt-cluster info output. For example, to have a backend holding only instances with archipelago disk templates, you can set the –ipolicy-disk-templates to include only the ext disk template.

gnt-cluster modify --ipolicy-disk-templates=ext

Upgrade Steps

The upgrade to v0.15 consists in the following steps:

  1. Bring down services and backup databases.
  2. Upgrade packages, migrate the databases and configure settings.
  3. Create floating IP pools
  4. Re-register services and resources.
  5. Bring up all services.

Warning

It is strongly suggested that you keep separate database backups for each service after the completion of each step.

1. Bring web services down, backup databases

  1. All web services must be brought down so that the database maintains a predictable and consistent state during the migration process:

    $ service gunicorn stop
    $ service snf-dispatcher stop
    $ service snf-ganeti-eventd stop
  2. Backup databases for recovery to a pre-migration state.

  3. Keep the database servers running during the migration process.

2. Upgrade Synnefo and configure settings

2.1 Install the new versions of packages

astakos.host$ apt-get install \
                        python-objpool \
                        snf-common \
                        python-astakosclient \
                        snf-django-lib \
                        snf-webproject \
                        snf-branding \
                        snf-astakos-app

cyclades.host$ apt-get install \
                        python-objpool \
                        snf-common \
                        python-astakosclient \
                        snf-django-lib \
                        snf-webproject \
                        snf-branding \
                        snf-pithos-backend \
                        snf-cyclades-app

pithos.host$ apt-get install \
                        python-objpool \
                        snf-common \
                        python-astakosclient \
                        snf-django-lib \
                        snf-webproject \
                        snf-branding \
                        snf-pithos-backend \
                        snf-pithos-app \
                        snf-pithos-webclient

ganeti.node$ apt-get install \
                        python-objpool \
                        snf-common \
                        snf-cyclades-gtools \
                        snf-pithos-backend \
                        snf-network

Note

Make sure ‘snf-webproject’ has the same version as ‘snf-common’.

Note

Installing the packages will cause services to start. Make sure you bring them down again (at least gunicorn, snf-dispatcher).

2.2 Sync and migrate the database

Note

If you are asked about stale content types during the migration process, answer ‘no’ and let the migration finish.

astakos-host$ snf-manage syncdb
astakos-host$ snf-manage migrate

cyclades-host$ snf-manage syncdb
cyclades-host$ snf-manage migrate

pithos-host$ pithos-migrate upgrade head

2.3 Configure Astakos authentication URL

The ASTAKOS_BASE_URL setting has been replaced (both in Cyclades and Pithos services) with the ASTAKOS_AUTH_URL setting.

For Cyclades service we have to change the 20-snf-cyclades-app-api.conf file, remove the ASTAKOS_BASE_URL setting and replace it with ASTAKOS_AUTH_URL. Typically it is sufficient to add /identity/v2.0 at the end of base URL to get the auth URL. For example, if base URL had the value of ‘https://accounts.example.synnefo.org/‘ then the ASTAKOS_AUTH_URL setting will have the value of ‘https://accounts.example.synnefo.org/identity/v2.0‘.

The same change has to be made for the Pithos service in /etc/synnefo/20-snf-pithos-app-settings.conf.

2.4 Register Pithos view as an OAuth 2.0 client in Astakos

Starting from Synnefo version 0.15, the Pithos view, in order to get access to the data of a protected Pithos resource, has to be granted authorization for the specific resource by Astakos.

During the authorization grant procedure, it has to authenticate itself with Astakos, since the latter has to prevent serving requests by unknown/unauthorized clients.

Each oauth 2.0 client is identified by a client identifier (client_id). Moreover, the confidential clients are authenticated via a password (client_secret). Then, each client has to declare at least a redirect URI so that astakos will be able to validate the redirect URI provided during the authorization code request. If a client is trusted (like a pithos view) astakos grants access on behalf of the resource owner, otherwise the resource owner has to be asked.

To register the pithos view as an OAuth 2.0 client in astakos, use the following command:

astakos-host$ snf-manage oauth2-client-add pithos-view --secret=<secret> --is-trusted --url <redirect_uri>

The redirect_uri should be the PITHOS_BASE_URL plus the /ui/view suffix, for example:

https://node2.example.com/pithos/ui/view

You can see the registered clients by running:

astakos-host$ snf-manage oauth2-client-list -o id,identifier,redirect_urls,is_trusted

Finally, you will have to add the registered identifier (e.g. pithos-view) and client_secret to the PITHOS_OAUTH2_CLIENT_CREDENTIALS setting in /etc/synnefo/20-snf-pithos-app-settings.conf.

2.5 Upgrade vncauthproxy and configure snf-cyclades-app

Synnefo v0.15 adds support for snf-vncauthproxy >= 1.5 and drops support for older versions. You will have to upgrade snf-vncauthproxy to v1.5 and configure the authentication (users) file (/var/lib/vncauthproxy/users).

In case you are upgrading from an older snf-vncauthproxy version or if it’s the first time you’re installing snf-vncauthproxy, you will need to add a vncauthproxy user (see below for more information on user management) and restart the vncauthproxy daemon.

To manage the authentication file, you can use the vncauthproxy-passwd tool, to easily add, update and delete users.

To add a user:

# vncauthproxy-passwd /var/lib/vncauthproxy/users synnefo

You will be prompted for a password.

You should also configure the new CYCLADES_VNCAUTHPROXY_OPTS setting in snf-cyclades-app, to provide the user and password configured for synnefo in the vncauthproxy authentication file and enable SSL support if snf-vncauthproxy is configured to run with SSL enabled for the control socket.

Warning

The vncauthproxy daemon requires a restart for the changes in the authentication file to take effect.

Warning

If you fail to provide snf-vncauthproxy with a valid authentication file, or in case the configuration of vncauthproxy and the vncauthproxy snf-cyclades-app settings don’t match (ie not having SSL enabled on both), VNC console access will not be functional.

Finally, snf-vncauthproxy-1.5 adds a dedicated user and group to be used by the vncauthproxy daemon. The Debian default file has changed accordingly (CHUID option in /etc/default/vncauthproxy). The Debian default file now also includes a DAEMON_OPTS variable which is used to pass any necessary/extra options to the vncauthproxy daemon. In case you’re ugprading from an older version of vncauthproxy, you should make sure to ‘merge’ the new default file with the older one.

Check the documentation of snf-vncauthproxy for more information on upgrading to version 1.5.

2.6 Stats configuration

snf-cyclades-gtools comes with a collectd plugin to collect CPU and network stats for Ganeti VMs and an example collectd configuration. snf-stats-app is a Django (snf-webproject) app that serves the VM stats graphs by reading the VM stats (from RRD files).

To enable/deploy the VM stats collecting and snf-stats-app, see the relevant documentation in the admin guide.

If you were using collectd to collect VM stats on Debian Squeeze and you are upgrading to Wheezy, you will need to upgrade your RRD files. Follow the instructions on the collectd v4-to-v5 migration guide. You will probably just need to run the migration script provided.

If you were using a previous version of snf-stats-app, you should also make sure to set the STATS_BASE_URL setting in 20-snf-stats-app-settings.conf to match your deployment and change the graph URL settings in 20-snf-cyclades-app-api.conf accordingly.

v0.15 has also introduced the CYCLADES_STATS_SECRET_KEY and STATS_SECRET_KEY settings. CYCLADES_STATS_SECRET_KEY in 20-snf-cyclades-app-api.conf is used by Cyclades to encrypt the instance id / hostname in the URLs serving the VM stats. You should set it to a random value/string and make sure that it’s the same as the STATS_SECRET_KEY setting (used to decrypt the instance hostname) in 20-snf-stats-settings.conf on your Stats host.

2.7 Shibboleth configuration updates

Note

Skip this step unless you have shibboleth enabled in Astakos IM_MODULES setting.

As of v0.15 Astakos uses the REMOTE_USER header provided by Apache’s mod_shib2 service in order to resolve the unique identifier which is used to associate a shibboleth account to a local Astakos user. Prior to this version, Astakos adhered to the presence of the MOD_SHIB_EPPN header which although safe enough on most of the SP deployment scenarios, it may cause issues in certain cases, such as global wide IdP support or inability of supported IdPs to release the eduPersonPrincipalName attribute. The REMOTE_USER header can be set by administrators to match any of the available shibboleth attributes.

If EPPN matches the service provider needs and you want to continue using it as the unique identifier, you need to ensure that the REMOTE_USER attribute is set to eppn in the mod_shib2 config file located at /etc/shibboleth/shibboleth2.xml

<!-- The ApplicationDefaults element is where most of Shibboleth's SAML bits are defined. -->
<ApplicationDefaults entityID="https://sp.example.org/shibboleth" REMOTE_USER="eppn">

Otherwise, if EPPN doesn’t suit the requirements for your SP deployment, change the REMOTE_USER attribute as required e.g.:

<!-- The ApplicationDefaults element is where most of Shibboleth's SAML bits are defined. -->
<ApplicationDefaults entityID="https://sp.example.org/shibboleth" REMOTE_USER="persistent-nameid persistent-id targeted-id">

and restart the shibd service:

$ service shibd restart

Note that every time you alter the REMOTE_USER attribute, all existing shibboleth enabled Astakos users will be invalidated and no longer be able to login to their existing account using shibboleth. Specifically, for the case of switching from eppn to another attribute, Astakos is able to prevent invalidation and automatically migrate existing eppn accounts. In order to do that, set the ASTAKOS_SHIBBOLETH_MIGRATE_EPPN setting to True in 20-snf-astakos-app-settings.conf configuration file. Now every time an existing eppn user logs in using shibboleth, Astakos will update the associated eppn identifier to the contents of the REMOTE_USER header.

Warning

IdPs should keep releasing the EPPN attribute in order for the migration to work.

3. Create floating IP pools

Synnefo v0.15 introduces floating IPs, which are public IPv4 addresses that can be dynamically added/removed to/from VMs and are quotable via the cyclades.floating_ip resource. Connecting a VM to a public network is only allowed if the user has first allocated a floating IP from this network.

Floating IPs are created from networks that are marked as Floating IP pools. Creation of floating IP pools is done with the snf-manage network-create command using the –floating-ip-pool option.

Existing networks can be converted to floating IPs using network-modify command:

snf-manage network-modify --floating-ip-pool=True <network_ID>

Already allocated public IPv4 addresses are not automatically converted to floating IPs. Existing VMs can keep their IPv4 addresses which will be automatically released when these VMs get destroyed. If the admin wants to convert existing public IPs to floating IPs, he/she can do so by running the following provided tool:

cyclades.host$ /usr/lib/synnefo/tools/update_to_floating_ips

or just for one network:

cyclades.host$ /usr/lib/synnefo/tools/update_to_floating_ips --network-id=<network_ID>

4. Register services and resources

4.1 Re-register service and resource definitions

You will need to register again all Synnefo components, updating the service and resource definitions. On the Astakos node, run:

astakos-host$ snf-component-register

This will detect that the Synnefo components are already registered and ask to re-register. Answer positively. You need to enter the base URL and the UI URL for each component, just like during the initial registration.

Note

You can run snf-manage component-list -o name,ui_url to inspect the current registered UI URL. In the default installation, the base URL can be found by stripping /ui from the UI URL.

The meaning of resources cyclades.cpu and cyclades.ram has changed in v0.15: they now denote the number of CPUs/RAM of active VMs (VMs that are not shutdown) rather than all VMs as happened until now. To represent total CPUs and total RAM, as previously, two new resources cyclades.total_cpu and cyclades.total_ram are introduced. We now also control the usage of floating IPs through the resource cyclades.floating_ip.

4.2 Tweek resource settings

The new resources (cyclades.total_cpu, cyclades.total_ram, and cyclades.floating_ip) are registered with infinite default base quota (meaning that they are not restricted at all). You will probably need to restrict them, especially cyclades.floating_ip. In order to change the default limit of a resource for all future users, for instance restricting floating IPs to 2, run:

astakos-host$ snf-manage resource-modify cyclades.floating_ip --default-quota 2

Note that this command does not affect existing users any more. They can still have infinite floating IPs. You can update base quota of existing users in bulk, possibly excluding some users, with:

astakos-host$ snf-manage user-modify --all --base-quota cyclades.floating_ip 2 --exclude userid1,userid2

Note

You can inspect base quota with snf-manage quota-list, before applying any changes, for example:

# Get users with cyclades.vm base quota that differ from the default value
astakos-host$ snf-manage quota-list --with-custom=True --filter-by "resource=cyclades.vm"

# Get users with cyclades.vm base quota greater than 3
astakos-host$ snf-manage quota-list --filter-by "resource=cyclades.vm,base_quota>3"

Furthermore in v0.15, it is possible to control whether a resource is visible to the users via the API or the Web UI. The default value for these options is denoted inside the default resource definitions. Note that the system always checks and enforces resource quota, regardless of their visibility. By default, the new resources cyclades.total_cpu, cyclades.total_ram and astakos.pending_app are not visible neither via the API nor via the Web UI. You can change this behavior with:

astakos-host$ snf-manage resource-modify <resource> --api-visible=True (or --ui-visible=True)

4.3 Update the Quotaholder

To update quota for all new or modified Cyclades resources, bring up Astakos:

astakos-host$ service gunicorn start

and run on the Cyclades node:

cyclades-host$ snf-manage reconcile-resources-cyclades --fix --force

5. Bring all services up

After the upgrade is finished, we bring up all services:

astakos.host  # service gunicorn start
cyclades.host # service gunicorn start
pithos.host   # service gunicorn start

cyclades.host # service snf-dispatcher start